Waterpik waterfloser WP-100 Series Quick Start Manual
Hide thumbs
Also See for waterfloser WP-100 Series:
- User manual ,
- Instruction manual (44 pages) ,
- Instructions manual (44 pages)
Advertisement
Quick Links
QUICK START GUIDE
1
First Use
O
Fill reservoir with warm
water and replace it rmly
on the base.
Power
ON
High
This device is only compatible with voltages of 100-240 VAC, 50/60 Hz
WP-100 Series
Fill
ON
Replace
OFF
I
ON
OFF
Water
ON
O
I
Insert tip rmly until
it clicks into place.
Turn pressure to high, point tip
into sink. Turn Power switch
ON and water switch ON until
water ows. Turn OFF.
O
I
Insert
ON
OFF
©2019 Water Pik, Inc.
Advertisement
Related Manuals for Waterpik waterfloser WP-100 Series
Summary of Contents for Waterpik waterfloser WP-100 Series
- Page 1 QUICK START GUIDE WP-100 Series First Use Fill Insert Replace Fill reservoir with warm Insert tip rmly until water and replace it rmly it clicks into place. on the base. Turn pressure to high, point tip Water into sink. Turn Power switch Power ON and water switch ON until water ows.
- Page 2 QUICK START GUIDE WP-100 Series Water Floss Water With power OFF and water Lean over sink. Close lips switch in OFF position, place enough to prevent splashing, tip in mouth. Turn power ON. while still allowing water to Turn water switch to ON. Start ow from mouth into sink.