Table of Contents
Advertisement
Operation Manual / TPL69-A10 / -A30 ... TPL77-A10 / -A30
8 Disassembly and assembly / 8.7 Fitting the cartridge group
© Copyright 2020 . All rights reserved.
CAUTION
If the rotor blades have insufficient or no clearance, the blades and cas-
ing could be damaged.
Check that the blades do not rub on the turbine diffuser by rotating
u
the rotor.
Remove the lifting gear.
u
Fit O-ring (42012).
u
Screw in the speed sensor (86505) together with the O-ring (86506)
u
and plug in the cable connector (86515).
Reconnect oil pipes.
u
Version with compressor wheel cooling system
Fit the O-ring (42124).
u
Fit the air supply line. (See also chapter entitled Preliminary remarks /
u
Layout and functionality)
HZTL2481_EN
Rev.D
March 2020
Advertisement
Table of Contents
