Ventamatic QuFRESH AS1000WHT Owner's Manual page 5

VARIABLE SPEED: It control fan motor speed and unit

1. VARIABLE SPEED:
ON/OFF. Maximum seting to 500CFM
Used to control fan motor speed and unit ON/OFF.
AMPS/TIME:

Maximum setting to 500 CFM
Press keys, The PCB can switched display motor
2. AMPS/TIME:
actual running current and total running time.
Press (ICON) key to toggle display from actual running amps
CHANGE HEPA FILTER: The change light illuminates when

to total running time
you need to change the HEPA filter.
CIRCUIT BREAKER: The primary purpose of the circuit

3. CHANGE HEPA FILTER:
breaker is to protect the machine. It turns the unit off
Change HEPA Filter light illuminates when you need to
when more than 12 amps run through the on-unit circuit.
change the HEPA filter.
Ground Fault Circuit Interrupter (GFCI): The GFCI helps

4. CIRCUIT
protect the user should it detect a sudden "ground fault,"
The primary purpose of the circuit breaker is to protect the
the GFCI will interrupt the electric current. The GFCI will
wiring to the machine. It turns the unit off when more than 12
also trip when a short circuit or an overload occurs.
amps runs through the circuit.
When the GFCI "trips," unplug the unit, and look for
5. GROUND FAULT CIRCUIT INTERRUPTER
potential hazards standing water, frayed cords, etc.
The GFCI helps protect the user should it detect a sudden
anything that would cause a surge of electrical current.
"ground fault," the GFCI will interrupt the electrical current.
Relocate the unit and plug it into a different outlet. Then
The GFCI will also trip when a short circuit or an overload
push the "reset" button, and check to see if it's operating;
occurs. When the GFCI "trips," unplug the unit, and look for
if so, continue use, if not contact your local distributor.
potential hazards such as standing water, frayed cords, etc.
or anything that would cause a surge of electrical current.
Relocate the unit and plug it into a different outlet. Then push
the "RESET" button and check to see if it is operating; if so,
continue use, if not contact your local distributor.
Ventamatic, Ltd.
CONTROL PANEL
CONTROL PANEL
BREAKER:......................................................................
- 4 -
P.O. Box 728, Mineral Wells, TX 76068-0728
Diag. 3
Control Panel Layout
1-800-433-1626
(GFCI):...................
Fax: 940.325.9311 www.BVC.com
5