Panasonic NP-TH1HK Operating Instructions Manual page 14

Installation Instructions Installation Instructions
4 4
Secure the drain hose with a sucker Secure the drain hose with a sucker
Drain hose Drain hose
→ If the drain hose is too long, cut neatly at the appropriate → If the drain hose is too long, cut neatly at the appropriate
position along the core wire (transparent). position along the core wire (transparent).
5 5
Trial operation Trial operation
● Make sure that all adhesive tapes used to fix the door and inside of the dishwasher and the ● Make sure that all adhesive tapes used to fix the door and inside of the dishwasher and the
packaging bags of all parts have been removed. packaging bags of all parts have been removed.
● Make sure that the supply valve is open, plug in the power plug and close the door. ● Make sure that the supply valve is open, plug in the power plug and close the door.
● Please perform a trial test of the dishwasher according to the following procedures. ● Please perform a trial test of the dishwasher according to the following procedures.
· If there is no water supply and electricity supply temporarily, perform a trial test of the · If there is no water supply and electricity supply temporarily, perform a trial test of the
dishwasher when water supply and electricity supply resume. (Do not fill in water by hand) dishwasher when water supply and electricity supply resume. (Do not fill in water by hand)
■ Procedures for trial operation ■ Procedures for trial operation
❶ Press ❶ Press
to turn on the power to turn on the power
❷ Press and hold ❷ Press and hold
for more than 3 seconds simultaneously for more than 3 seconds simultaneously
· The indictors for Speedy and Care in the display light up and emit 2 beep sounds · The indictors for Speedy and Care in the display light up and emit 2 beep sounds
❸ Press ❸ Press
to start the trial operation to start the trial operation
· Please confirm the following during and after the operation. · Please confirm the following during and after the operation.
· Power will automatically be turned off and the display indictors light off after · Power will automatically be turned off and the display indictors light off after
completion of the trial operation completion of the trial operation
■ Trial operation confirmation ■ Trial operation confirmation
During operation During operation
Error indication : There should be no alarm sound nor abnormal indication on the display. Error indication : There should be no alarm sound nor abnormal indication on the display.
(page EN16) (page EN16)
Water leakage : There should be no leakage at the joints of the water supply hose and drain hose. Water leakage : There should be no leakage at the joints of the water supply hose and drain hose.
When the operation completed When the operation completed
After 6 beep sounds, power will be automatically turned off After 6 beep sounds, power will be automatically turned off
Drainage condition : Open the door and confirm that the water inside the dishwasher Drainage condition : Open the door and confirm that the water inside the dishwasher
has been drained out. has been drained out.
No water supply condition : When the power is off, confirm that no water is draining No water supply condition : When the power is off, confirm that no water is draining
out from the drain outlet. out from the drain outlet.
Reminder Reminder
● After the trial operation is completed, keep the supply valve open. ● After the trial operation is completed, keep the supply valve open.
● If the dishwasher will not be used for a long time, close the water valve to avoid water leakage. ● If the dishwasher will not be used for a long time, close the water valve to avoid water leakage.
● If freezing may occur, arrange draining treatment. (It may cause damage to the supply valve ● If freezing may occur, arrange draining treatment. (It may cause damage to the supply valve
resulting water leakage) → If freezing occurs, contact Service Centre resulting water leakage) → If freezing occurs, contact Service Centre
EN23 EN23
(cont.) (cont.)
sucker sucker
6 6
Checkup Checkup
● Please check the following before use. ● Please check the following before use.
Is the dishwasher installed on a solid horizontal surface? Make sure it won't shake or tilt. Is the dishwasher installed on a solid horizontal surface? Make sure it won't shake or tilt.
Is the water supply hose tightened, steady and straight? Is the water supply hose tightened, steady and straight?
Is there no water leakage at the connection between the water supply hose and the back Is there no water leakage at the connection between the water supply hose and the back
of the dishwasher? of the dishwasher?
Is there no water leakage at the connection between the water supply hose and the supply valve? Is there no water leakage at the connection between the water supply hose and the supply valve?
(If there is water leakage, please check whether the gasket is fitted properly.) (If there is water leakage, please check whether the gasket is fitted properly.)
Is the drain hose tightened, steady and straight? Is the drain hose tightened, steady and straight?
Is the drain hose bent, entangled, or damaged? Is the drain hose bent, entangled, or damaged?
Is the drain hose raised 20 cm or more? Is the drain hose raised 20 cm or more?
(Examples of incorrect drain hose arrangement) (Examples of incorrect drain hose arrangement)
Bent Bent Entangled Entangled Raised 20 cm Raised 20 cm
EN24 EN24