External 2.75 V (Vio) - Sony Ericsson GM 47 Technical Description

Parameter
Voltage HIGH Level (FALSE)
Voltage LOW Level (TRUE)
Pull-up Resistance
Time Description
t Time to start an ON/OFF operation
mr
Time for module start-up once ON/ OFF
t
pwr
signal has set to TRUE

3.5.2 External 2.75 V (VIO)

Parameter
Output Voltage (I
Load current
BA/SEM/MS 02:0004 Rev C
GM47/GM48 Technical description
Minimum
0
Internal pull up
Figure 3.2ON/OFF and VIO performance
Where the times are defined as follows:
The VIO has been derived from a 2.75 V regulator. It is possible to
use this output as a power supply at 2.75 V with a maximum of 75mA.
It will indicate that the module is alive and it could power external
devices. In this case, the external applications do not need to
implement a 2.75 volt regulator to adapt the incoming (from module
point of view) serial data.
=50 mA)
load
Typical Maximum
VCC
0.3*VCC
39
Min Typ
1 1.5
100
Minimum Typical Maximum Units
2.70 2.75 2.85
75
Units
By internal
pull up only
Volts
Ω
K
Max Unit
S
200 MS
Volts
mA
18