Table of Contents
Advertisement
4.29 Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1 Press
2 Select [Setup] > [TV settings] >
[Factory settings] , then press OK.
3 Enter the PIN code(with a default value
of 8888) select RESET, press OK to star t
resetting previous settings.
4.30 Install channels
The first time you set up your TV, you are
prompted to select a menu language and to
install TV. Afterwards, you can re-install and
fine tune channels.
4.31 Automatically install channels
Press
1
2
Select [Setup] > [Search for channel]
then press OK
4.32 Manually install channels
Step 1 Search and store new TV
channels
1 Press
2 Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue:
Manual antenna installation] > [Find
channel], then press OK
•
If you know the three-digit
frequency of the channel, enter it.
•
To search, select [Search] , then
press OK
3 When the channel is found, select [Done],
then press OK
•
To store the channel as a new
number, select [Store as new
channel] , then press OK
•
To store the channel as the
previously selected channel, select
[Store current channel] , then press
OK .
EN 17
Advertisement
Table of Contents
