Acer N368 User Manual page 50

40
9 Image is too small
or too large
10 Image has slanted
sides
11 Image is reversed
• Adjust the zoom ring on the projector.
• Move the projector closer to or further from the
screen.
• Press "MENU" on the remote control. Go to "Image -
-> Aspect Ratio" and try different settings or press
"RATIO" on the remote control to adjust directly.
• If possible, reposition the projector so that it is
centered on the screen.
• Press the "Keystone
control until the sides are vertical.
• Select "Image --> Projection Mode" on the OSD and
adjust the projection direction.
/ " button on the remote