Gigabyte GA-F2A88XM-D3HP User Manual page 37

& CPU core Control
Allows you to determine whether to manually enable/disable CPU cores. Automatic mode allows the BIOS
to enable all CPU cores (number of cores available depends on the CPU being used). (Default: Automatic
mode)
& APM
Enables or disables Application Power Management. (Default: Enabled)
& Extreme Memory Profile (X.M.P.)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disabled Disables this function. (Default)
Uses Profile 1 settings.
Profile1
Uses Profile 2 settings.
(Note)
Profile2
& AMD Memory Profile (A.M.P.)
Allows the BIOS to read the SPD data on AMP memory module(s) to enhance memory performance when
enabled. (Default: Disabled)
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& Memory Frequency (MHz)
This value is automatically adjusted according to the CPU Clock Control and System Memory Multiplier
settings.
(Note) This item is present only when you install a memory module that supports this feature.
(Note)
(Note)
- 37 - BIOS Setup