Peripherals - Gigabyte GA-Z270X-Gaming User Manual

2-5

Peripherals

& Initial Display Output
Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard
graphics.
IGFX Sets the onboard graphics as the first display.
Sets the graphics card on the PCIEX16 slot as the first display. (Default)
PCIe 1 Slot
Sets the graphics card on the PCIEX8 slot as the first display.
PCIe 2 Slot
Sets the graphics card on the PCIEX4 slot as the first display.
PCIe 3 Slot
& OnBoard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& EZ RAID
Allows you to quickly set up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions
on configuring a RAID array.
& LED_C Connect
Enables or disables the lights of the RGB (RGBW) LED strip connected to the LED_C header on the
motherboard. (Default: Enabled)
& RGB Fusion
Allows you to set the LED lighting mode for the motherboard.
Disables this function.
Off
Pulse Mode All LEDs simultaneously fade in and fade out.
Color Cycle All LEDs simultaneously cycle through a full spectrum of colors.
Static Mode All LEDs emit a single color. (Default)
All LEDs simultaneously flash on and off.
Flash Mode
- 34 -