Installing The Memory; Dual Channel Memory Configuration - Gigabyte GA-EP31-DS3LP User Manual

Lga775 socket motherboard for intel core processor family/ intel pentium processor family/intel celeron processor family
Table of Contents

Advertisement

1-4

Installing the Memory

Read the following guidelines before you begin to install the memory:
• Make sure that the motherboard supports the memory. It is recommended that memory of
the same capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest memory support list.)
• Always turn off the computer and unplug the power cord from the power outlet before
installing the memory to prevent hardware damage.
• Memory modules have a foolproof design. A memory module can be installed in only one
direction. If you are unable to insert the memory, switch the direction.

1-4-1 Dual Channel Memory Configuration

This motherboard provides four DDR2 memory sockets and supports Dual Channel
Technology. After the memory is installed, the BIOS will automatically detect the
specifications and capacity of the memory. Enabling Dual Channel memory mode
will double the original memory bandwidth.
The four DDR2 memory sockets are divided into two channels and each channel has two memory
sockets as following:
Channel 0: DDR2_1, DDR2_2
Channel 1: DDR2_3, DDR2_4
Due to chipset limitation, read the following guidelines before installing the memory in Dual Channel mode.
1. Dual Channel mode cannot be enabled if only one DDR2 memory module is installed.
2. When enabling Dual Channel mode with two or four memory modules, it is recommended that
memory of the same capacity, brand, speed, and chips be used and installed according to the
configurations in the first table for optimum performance.
3. Because of chipset limitations, do not populate both DIMM sockets of the same channel
(e.g. DDR2_1 and DDR2_2) with double-sided memory modules to prevent system's failure to
start or incorrect detection of memory modules.
GA-EP31-DS3LP Motherboard
Dual Channel Memory Configurations Table
Two Modules
Four Modules
(SS=Single-Sided, DS=Double-Sided, "- -"=No Memory)
- 16 -
DDR2_1 DDR2_2 DDR2_3 DDR2_4
DS/SS
- -
DS/SS
DS/SS
- -
- -
- -
DS/SS
DS/SS
- -
DS/SS
- -
SS
SS
SS
- -
DS/SS
- -
DS/SS
SS

Advertisement

Table of Contents
loading

Table of Contents