Table of Contents
Advertisement
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 2.5 Gbps data rate. The following
describes the states of the LAN port LEDs.
Speed LED
Activity LED
Speed LED:
State
Green
Orange
Off
LAN Port
Line Out/Front Speaker Out
The line out jack.
Mic In/Rear Speaker Out
The Mic in jack.
Optical S/PDIF Out Connector
This connector provides digital audio out to an external audio system that supports digital optical audio.
Before using this feature, ensure that your audio system provides an optical digital audio in connector.
Audio Jack Configurations:
Jack
Line Out/Front Speaker Out
Mic In/Rear Speaker Out
Front Panel Line Out/Side Speaker Out
Front Panel Mic In/Center/Subwoofer
Speaker Out
• You can change the functionality of an audio jack using the audio software.
• To configure 7.1-channel audio, you need to open the audio software and select Device
advanced settings > Playback Device to change the default setting first.
• When removing the cable connected to a back panel connector, first remove the cable from
your device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side
to prevent an electrical short inside the cable connector.
Please visit GIGABYTE's website for details on configuring the audio software.
Activity LED:
Description
State
2.5 Gbps data rate
Blinking
1 Gbps data rate
On
100 Mbps data rate
Headphone/
4-channel
2-channel
a
a
a
- 18 -
Description
Data transmission or receiving is occurring
No data transmission or receiving is occurring
5.1-channel
7.1-channel
a
a
a
a
a
a
Hide quick links:
Advertisement
Table of Contents
