Bosch Dremel Stylo+ Original Instructions Manual page 10

WARNING
!
adapter
6-A
button.
button.
material.
between any one of the settings.
accessory being used. These charts enable you to select both
the correct accessory and the optimum speed at a glance.
The speed of Rotary Tool is controlled by setting this dial on the
1
2
4
5
speed the friction of the accessory generates heat and may
cause damage to the material.
operations employing the felt polishing accessories. They may
drilling should also be done at high speeds.
accessories in our line will provide the best performance at full
speed, but for certain materials, applications, and accessories,
you need slower speeds, which is the reason our variable
speed models are available.
GisDocView (ZVS-EMEA): DV-2610Z09751-MUL-AB, downloaded 2018-11-21 01:55:37 UTC by zce2sgh - PT-RT/MKT-AP (10/42)
5
to determine the proper
10
on any material is to practice for a few minutes on a piece of
Let speed do the work!
This tool has a stall protection feature built into it to protect the
using it.
Preventive maintenance performed by unauthorized personnel
may result in misplacing of internal wiring and components
remove plug from wall outlet before performing service or
WARNING
!
Always wear safety goggles when cleaning tools with compressed
air.
WARNING
!
cleaning solvents, ammonia and household detergents that contain
ammonia.
WARNING
!
recommend that all tool service be performed by a Dremel Service
the warranty.
We