Gigabyte Z690I AORUS ULTRA User Manual page 10

USB Chipset:
Š
-
-
-
-
-
Chipset+USB 2.0 Hub:
Š
-
Internal 1 x 24-pin ATX main power connector
Š
Connectors 1 x 8-pin ATX 12V power connector
Š
1 x external power connector
Š
1 x CPU fan header
Š
1 x water cooling CPU fan header
Š
2 x system fan headers(SYS_FAN1/SYS_FAN2
Š
1 x addressable LED strip header
Š
1 x RGB LED strip header
Š
2 x M.2 Socket 3 connectors(M2A_CPU
Š
2 x SATA 6Gb/s connectorsj
Š
4 x SATA 6Gb/s connectorsk
Š
1 x front panel header
Š
1 x front panel audio header(routed from the adapter card on the rear panel)
Š
1 x speaker header
Š
1 x USB Type-C
Š
1 x USB 3.2 Gen 1 header
Š
1 x USB 2.0/1.1 header
Š
1 x reset button
Š
1 x reset jumper
Š
1 x Clear CMOS jumper
Š
Back Panel 2 x SMA antenna connectors (2T2R)
Š
Connectors 1 x DisplayPort
Š
1 x HDMI port
Š
1 x USB Type-C
Š
3 x USB 3.2 Gen 2 Type-A ports (red)
Š
2 x USB 3.2 Gen 1 ports
Š
2 x USB 2.0/1.1 ports
Š
1 x Q-Flash Plus button
Š
1 x RJ-45 port
Š
2 x audio jacks
Š
Only for Z690I AORUS ULTRA.
j
Only for Z690I A ULTRA DDR4.
k
(Note 1) The connector is on the front of GC-Z690I BTB PLUG.
(Note 2) The connector is on the back of GC-Z690I BTB PLUG.
1 x USB Type-C port on the back panel, with USB 3.2 Gen 2x2 support
®
1 x USB Type-C port with USB 3.2 Gen 2 support, available through the
®
internal USB header
3 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
2 x USB 2.0/1.1 ports on the back panel
4 x USB 2.0/1.1 ports available through the USB headers on the front of
GC-Z690I BTB PLUG
(Note 1)
(Note 1)
header, with USB 3.2 Gen 2 support
®
(Note 1)
(Note 1)
port, with USB 3.2 Gen 2x2 support
®
- 10 -
)
(Note 1)
/M2P_SB )
(Note 2) (Note 1)