This product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product however is far much less than

the electromagnetic energy emitted by wireless devices like for example mobile phones.

Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we believe this product is safe for use

by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and commit-

tees of scientists who continually review and interpret the extensive research literature.

In some situations or environments, the use of this product may be restricted by the proprietor of the building or responsible representatives of the organiza-

tion. These situations may for example include:

l Using this product on board of airplanes, or

l In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment (e.g. airports), you are encouraged to ask

for authorization to use this product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or television interference caused by unauthorized modification of this product. The correction of interference caused by

such unauthorized modification will be the responsibility of the user. We and its authorized resellers or distributors are not liable for damage or violation of

government regulations that may arise from failing to comply with these guidelines.

Camera Light

CAUTION

The light from the LED is strong and can injure human eyes.

Do not look directly at the LEDs with naked eyes.

USB Type-C Adaptors and Cables

Use USB Type-C adaptors and cables comply with IEC 62680-1-2 (USB Power Delivery Specification).

Laser Devices

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARD-

OUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

The following label is put on the rear side of the computer.

This equipment is using lasers that comply with IEC60825-1:2014, EN 60825-1:2014 and JIS C6802:2014 regulations.

The laser is a "Class 2" laser which is indicated on the label for this product. Class 2 laser readers use a low power, visible light diode. As with any very bright

light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful.

Caution-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

n Labeling/Marking

Location of aperture

Beam Divergence

- Vertical angle: 30 degree

- Horizontal angle: 36 degree

650 nm, 1 mW MAX, 16.8 ms

26-E-1

57-E-1

12-E-1

13-E-1

Table of Contents