Table 33 Tightening Torque (56014) - ABB A170-M66 Operation Manual

Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly
Figure 43: Installing nozzle ring 2
Part number
56014
Table 33: Tightening torque (56014)
6. Undo nuts (61037) and remove guide plate (90328).
7. Undo screws (90339) and remove retaining plate (90338) with guide rod (90336).
8. Coat the threads of screws (56014) and the contact surface between screw and locking
washer with high-temperature grease.
9. Fit the nozzle ring (56001) on the gas inlet casing (51001) using the screws (56014) and
locking washers (56015).
10. Bend over locking washers (56015).
© Copyright 2016 ABB. All rights reserved.
A170-M
M10
50 Nm
HZTL4033_EN
Page 74 / 113
A175-M
M10
50 Nm
Revision A July 2016