Download Print this page
MGG EF-SRS6-150 User Manual

MGG EF-SRS6-150 User Manual

Electric fencing energizer

Advertisement

Quick Links

ELECTRIC FENCING ENERGIZER
USER MANUAL
Model MGG EF-SRS6-150
For up to 5Km wire
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the EF-SRS6-150 and is the answer not in the manual?

Questions and answers

Summary of Contents for MGG EF-SRS6-150

  • Page 1 ELECTRIC FENCING ENERGIZER USER MANUAL Model MGG EF-SRS6-150 For up to 5Km wire...
  • Page 2: Table Of Contents

    Contents 1. Introduction ..................3 2. Important safety introduction ............3 3. Specification ..................5 4. Installation guide ................6 5. Maintenance ..................8 6. Guarantee ..................9...
  • Page 3: Introduction

    In the unlikely event that you are not happy with your purchase, please return the energizer in new condition to MGG within 14 days of purchase and we will give you a full refund (excluding freight). If you have any questions regarding this product please email info@mggproducts.co.nz...
  • Page 4 not less than 500 ohms be connected between the energizer and the electric fence in this area. ⚫ The appliance is not intended for use by young children or infirm persons without supervision. ⚫ Do not place combustible materials near the fence or energizer connections.
  • Page 5: Specification

    IPX4. This energizer complies with international safety regulations and is manufactured to international standards. MGG reserves the right to make changes without notice to any product specification to improve reliability, function or design.
  • Page 6: Installation Guide

    The energizer can be mounted directly onto a 3cm x 2cm wooden batten using the post-mounting slot at the rear. To mount onto a wooden post screw the batten to the post. Also available from MGG are 3cm x 2cm plated steel stands. Connecting to an electric fence 1 Push a 1m to 2m plated earth rod fully into firm ground.
  • Page 7 ‘safe operating level’. Alternatively, the battery can be recharged with a 12v battery charger connected to the charge port on the rear of the energizer. The correct chargers are available from MGG Products. When fully charged, the battery should be able to power the energizer for up to two weeks with no sunlight.
  • Page 8: Maintenance

    3 days with energizer turned off. If the pulse indicator light is still not flashing, return the energizer to the MGG for service The battery needs Check that the solar panel is clean and is not damaged. Make frequent sure the energizer is positioned to receive maximum sunlight.
  • Page 9: Guarantee

    6. Guarantee We grant a warranty of 24 months as standard starting from the date of the purchase invoice. We will only perform warranty services when the faulty unit is returned to us together with a copy of the original invoice. The unit should be returned in its original or equivalent packaging, please preserve the original packing.
  • Page 10 Fence wire spacing guidelines 3 earth rods recommended. 1m to 2m long and each 1m apart...
  • Page 11 MGG Products, Kerikeri 0230, New Zealand www.mggproducts.co.nz email: info@mggproducts.co.nz The design and specification shall be subject to changes without prior notice. The final interpretation right of this event is reserved by our company.