Table of Contents
Advertisement
Click the user Settings option on other page points to enter the user Settings
page.
(Basic setting) Click to enter the basic Settings page, including temperature
and humidity Settings.
(Many setting) Click to enter the comprehensive Settings page, including
date time, monitoring address, etc.
(Alarm setting) Click to enter the alarm Settings page, including alarm value
Settings, alarm property Settings.
(Change password) Click to enter the change password page and change the
user password.
Basic Setting
Figure 6-11 Basic setting
(Temp Setting 0.0 °C) Set the temperature setting value, that is, the expected
indoor temperature.
(Humid Setting 0.0 %) Set the humidity setting value, that is, the expected
indoor humidity.
(Temp Band 0.0 °C) Set the temperature range, that is, the deviation of the
set point of the temperature, to ensure that there is a deviation in the
temperature point of the device starting and stopping, and it will not stop
frequently during the partial load. Set temperature ranges compatible with
frequent start-stop and allowable temperature fluctuations.
33
Advertisement
Table of Contents
