Operating Instructions - Kobalt 59725 Manual

OPERATING INSTRUCTIONS

1. Using the caster brakes
To lock the swivel casters, step
down the levers marked with
ON. To unlock casters, push
down the levers marked with
OFF.
Note: Be sure to lock both swivel casters
with brake to prevent tool cart from rolling
or swiveling.
2. Removing the drawers
Fully empty and extend the drawer.
Depending on the side, either lift or
lower the release lever on both sides
so the slides can ride over the stops.
Pull the drawer outward until it is
released from the slides.
3. Re-inserting the drawers
Pull the slides and slide carrier out
until fully extended. Hold the slide on
the tool cart while aligning it with the
slide on the drawer. Slightly insert
one side and repeat for the other
side. Slowly push the drawer until it is
fully closed to engage the slide.
Open and close the drawer to verify
proper operation.
Note: Do not slide in the drawer violently
until both drawer slides are aligned
properly or it will cause damage on
drawer slide.
1
OFF
2
3
9
ON