Kobalt 59725 Manual page 8

ASSEMBLY INSTRUCTIONS
5. Unlock and open the lid, secure the
cabinet (A) to the four posts (C) using
fourteen M8 x 11 mm bolts (AA) and M8
nuts (CC). Do not over tighten the bolts.
Note: Do not install the top 2 bolts and nuts
on the side with the 2 swivel casters with
brake (F), they are for the side handle (B) in
next step. For easier assembling, screw the 2
bolts on the bottom side first.
Hardware Used
AA
M8 x 11 mm Bolt
CC
M8 Nut
6. Attach the side handle (B) to the tool cart
using two M8 x 15 mm bolts (BB) and M8
nuts (CC). Tighten all bolts securely.
Note: The side handle (B) must be installed
on the end of the tool cart with swivel casters
with brake (F).
Hardware Used
BB
M8 x 15 mm Bolt
CC
M8 Nut
5
x 14
x 14
6
A
x 2
x 2
8
AA
CC
A
C
CC
C
C
B
BB