Table of Contents
Advertisement
9.4.2.
OIS Write Tool
1. In Windows 7 Operation System, copy the contents of the "ck36600 Write Test Flag AP Ver 01.01.20180319.OD" to a folder
of your PC.
2. Setting the DSC.
2-1) Set the battery to the camera.
2-2) Insert the SD memory card containing the "Enable
Test.txt" into the camera.
2-3) Turn off the power.
2-4) Continue pushing "
+"
Playback" at the same time during several seconds.
* Please press "
Playback " last.
It starts in the state of "Engineer Mode" automatically.
3. Please plug-in USB cable.
4. Click on "WriteTestFlag".
W KEY" +"
MENU/SET"
5. Click on "Start", it will write the "OIS data" into the cam-
era.
6. When the writing process is completed, AP will display
"PASS" and auto power off the camera.
36
Advertisement
Table of Contents
