Troubleshooting - Breville AirRounder Connect LPH408 Instruction Book

Troubleshooting

MINI TROUBLESHOOTING GUIDE
Before carrying out any of the following service checks, unplug the unit from the mains.
PROBLEM
Unit will not start
Insufficient air flow
Excessive noise
Not heating in the heating mode
Filter Indicator is still illuminated
after replacing the air filter
Breville Customer Service Centre (see back cover for contact details)
LPH408_ANZ_IB_D21_FA.indd 21 LPH408_ANZ_IB_D21_FA.indd 21
WHAT TO DO
•
Check that the power plug is connected to a power outlet and the
outlet is turned on.
•
Check that purifier fan heater is assembled correctly.
•
Check that the filter is fitted correctly in place.
•
Make sure the filter is removed from the packaging.
•
Check that the filters are clean.
•
Check for any obstructions in the air inlet and/or outlet.
•
Check if the filter is clogged and ready for replacement.
•
Check that the rear housing cover is closed properly.
•
Check that the unit is on a level surface
•
Check for any obstructions in the air inlet and/or outlet.
•
Surface temperature of the heating plate rises, and the thermostat
has stopped working.
•
Reset the REPLACE FILTER indicator (see page 19).
21
29/1/21 11:08 am 29/1/21 11:08 am