Table of Contents
Advertisement
REPLACING OR SHARPENING
THE CUTTING BLADE
NOTE: Before removing the blade
for sharpening or replacement,
ensure that you have a T10
screwdriver, a #4 wrench, and
an #13 socket wrench. Refer to
the replacement parts list in this
manual for the correct replacement
parts.
1. Press the latches on the battery
pack to remove it from the
product.
2. Place the product on a level
surface with the housing side
facing up. Turn the screws
counterclockwise
Remove the housing.
3. Flip the product onto its other
side.
4. Turn
the
locking
counterclockwise to remove.
Remove the washer and the
gear. Turn the locking nut
counterclockwise to remove.
1
2
to
unlock.
3
screw
4
1
T10
#4
1
2
2
1
3
2
#13
4
11
Maintenance
Advertisement
Table of Contents
