Scan For Devices; Pair With The Bluetooth Device; Network - Quer KM0973 Owner's Manual

Owner's manual

3.2.2 Scan for devices

After scanning, there will be a list of the IDs of all available Bluetooth devices in range.
If the device you want to pair with isn't in the list, ensure that the other device is turned
on and set to be discoverable.

3.2.3 Pair with the Bluetooth device

Tap the name of an available Bluetooth device to pair with. In the popup "Bluetooth
pairing request" dialog, type a PIN.
If the pairing is successful, your tablet connects to the device.
Example: to transmit a photo
Go to "Gallery", choose a photo to share. Tap icon or any spot on the photo to view a
submenu. Tap and then choose the device name in the Paired devices
list. The photo will then be sent.
You can touch the right icon to unpair the device.
Note: After pairing, it shows under the Bluetooth device "Paired but not connected", but
file transmission is still possible.
You can see the received files by touch the top right corner icon.
At present, the Bluetooth function only supports files transmission.
To extend battery life, turn Bluetooth power off when not in use.
3.3 3G Network
A 3G network is a mobile network that allows high-speed data access and advanced
network capacity. It features a wider range of services and advanced network capacity
over the previous 2G network.
Your tablet supports external 3G network by a 3G dongle. 3G dongles are connected
via the USB HOST port. There require a convert cable, you can find in the accessories.
Note: some models support 3G network optional. If you purchase this tablet with a SIM
card slot, you can access to the Internet via your 3G SIM card while Wi-Fi network is
not available. Please insert your 3G card into the SIM card slot of the tablet, and the
tablet will obtain 3G signal automatically. If you purchase this tablet without a SIM card
slot, you can also try to access to Internet with a USB 3G dongle.
28
KM0973_de_en_pl_ro.indd 28 2013-01-09 15:23:06