Wooden Wall Mounting, Wooden Studs For Single Layered Dry Walls - ONKRON M2S User Manual

2.1 Wooden wall mounting, wooden studs for single layered
dry walls
• Drill holes using a Ø 4 mm (5/32") bit at
depth minimum 1.97" (50mm).
IMPORTANT: Dowels (B) are not needed!
Сlosed mounting
IMPORTANT: Do not use the wrench (K) from the kit!
C
A
grooves
• Put the base of the mount
in a desired position and
m a r k f o u r h o l e s f o r
screws.
• Put the mount aside.
min 50 mm
(1.97")
• Put the mount at the wall;
m a k e s u r e c l o s e d
m o u n t i n g g r o o v e s a r e
located at the bottom.
• Install the base of the
mount to the wall using
s c r e w s М 6 х 5 0 ( A ) a n d
washers (C).
Bottom of the mount
K
5