Table of Contents
Advertisement
Chapter 5. Menu
Manual Network Setup (Wireless)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask,
gateway and DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these
steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the
4
On the
Support
Tab, click the
Details
displayed.
How to set up manually
1
Press the
button on the remote control.
MENU
2
Select
Network
-
Open Network
Settings.
3
Select Wireless.
‒ The network function searches for available wireless networks. When done, it
displays a list of the available networks.
4
Select Stop. The verification process stops.
5
Select
Add
Network.
6
Enter the SSID of the network and select Done.
7
Select the
Security type
and select OK. If you select Open, move to step 10.
8
If the router has security, enter the password. (Security key or PIN)
9
When done, use the button to move the cursor to Done, and then press
network test screen appears and then the verification process starts.
10
When the connection has been verified, select OK.
WPS(PBC)
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps.
Support
tab.
button. The Network connection values are
1
Press the
button on the remote control.
MENU
2
Select
Network
-
Open Network
3
Select Wireless.
‒ The network function searches for available wireless networks. When done, it
displays a list of the available networks.
4
Select Stop. The verification process stops.
5
Select
Use WPS
and press
6
Press the WPS(PBC) button on your router within 2 minutes. Your product
automatically acquires all the network setting values it needs and connects to your
network.
7
The network connection screen appears, and network setup is done.
. The
Settings.
.
64
Advertisement
Table of Contents
