Advertisement
2.
Enroll
Fingerprint Enrollment
Choosing different fingers
All fingers are available for enrollment but we
recommend the index fingers from each hand.
2.1
Go to 'Control Panel > Biometric Devices'
and click
Use your fingerprint with Windows
2.2
Select the Continue button in bottom
right corner.
2.3
You will be prompted to enter your
Windows password to gain access for
fingerprint enrollment.
2.4
Follow the step by step instructions for
enrolling your first fingerprint.
2.5
It is recommended to enroll additional
finger(s). However, this is not required.
2.6
Your Windows logon is now functional
and can be tested by performing a
logoff/logon.
2.7
Future logons can be performed by the
simple swipe of your finger.
Enroll | 3
3.
Install Roboform
Setting up Roboform Website Password Manager
3.1
Install the Roboform Free edition by launching
found on your Verifi CD.
3.2
During the install wizard you will be asked to enter an email and
master password to setup your Roboform account.. Your Free edition is
limited to the PC you first setup. To use the same passcards on other
encrypt all your future passcards ( Note: passcards are your individual
website login credentials) and is a backup to your fingerprint reader.
3.4
Now enable Roboform to use your fingerprint reader as a Master
Biometric Domain Logon
Please, contact your local IT admnistrator regarding biometric
domain logon to domain.
Setup 2 - Roboform
devices you can purchase the
Everywhere edition directly from
Roboform.
3.3
During installation you will be
prompted for an email and Master
Password. This password is used to
Password by right-clicking on system
tray roboform icon and selecting
'Options > Security' and enabling the
top check box "Enable fingerprint
authentication on WBF reader"
Install Roboform | 4
Advertisement
