BOX CONTENTS: 1 x Smart Doorbell Camera 1 x Mounting Bracket 1 x Mounting Hardware 1 x Chime 1 x USB Charging Cable 1 x User Manual PRODUCT DIAGRAM: 11 Power Plug PIR Motion Sensor Indicator Infrared LED Speaker 12 LED Indicator 13 Chime Speaker Microphone Volume Control...
Page 3
SETUP: Install App Download & install the “Smart Life” app from the Google Play or iOS App Store. This can be found by searching for “Smart Life” in the correct store for your phone, or by scanning the below QR code. Once you have downloaded &...
Page 4
SETUP: Add Device Press the “+” symbol in the top right of the screen, followed by the “Add Device” button to begin setting up your new wireless doorbell. Select “Add Manually”, choose “Security & Video Surveillance” and finally “Smart Doorbell” as the device.
Page 5
SETUP: Reset Device Before adding your new wireless doorbell, ensure the unit is reset & in pairing mode. To do this, with batteries inserted press and hold the “Reset” button on the rear until it makes a chime sound. Once confirmed, check the button and press next.
Page 6
SETUP: Setup WiFi If your mobile phone is not connected, the App will ask you to connect. Press the “Connect to WiFi” button & connect to the network your wireless door phone will be connected to. Once connected, enter the WiFi password into the app & press the “Next” button to begin the pairing process.
Page 7
SETUP: Scan QR Code With the doorbell still powered on, face the QR shown on the App in your phone towards the camera until a chime is heard. Press the “I Heard a Prompt” button to begin the pairing process. The device will begin linking to the app and may take a few minutes.
USING THE APP: When the doorbell is rung via the button on the unit, a notification will be sent to the App. Within the app, press the “Monitor Switch” button to enable talk and then press & hold the “Speak” button to talk through the door phone. Recorded photo &...
Need help?
Do you have a question about the WQC3886 and is the answer not in the manual?
Questions and answers