AccuRelief ACRL-9100 Quick Start Manual

Wireless 3-in-1
Pain Relief Device
Model ACRL-9100
KNOW YOUR DEVICE
Power on/o button
TENS
RECHARGEABLE
EMS
LITHIUM BATTARY
MASSAGE MASSAGE
3 1
IN
1
TURN ON THE BLUETOOTH
When you open the Wireless 3-in1 app in your
mobile phone, the app asks you to turn on
Bluetooth. Please accept.
- For iOS: Press settings to turn on Bluetooth.
- For Android: Press "allow" to turn on Bluetooth.
2
CONNECT THE GEL PADS
TO THE DEVICE
Each gel pad is pre-fixed
with a stud to connect
to the back of the device,
and is protected by a
transparent film.
Attach the gel pads
to the back of the
device, pressing
them in place.
3
PLACE THE GEL PADS
ON THE SKIN
Clip excess hair
from the area to be
treated. Wash with
soap and water,
and dry completely.
Remove the
protective film
layer and apply
the gel pad to the
skin. Press firmly
to ensure adhesion.
See the Recommended Gel
Pad Positions on reverse page.
PROGRAMS
TURN ON THE ACRL-9100
14
4
UNIT AND START A SESSION
THROUGH THE USE OF THE
DEVICE APPLICATION
Ensure that the Bluetooth (4.0) connection is activated on your
smartphone or tablet.
Apply pads to normal, healthy, clean and dry skin of adult patients because it may
otherwise disrupt the healing process.
If you experience any skin irritation or redness after a session, do not continue
stimulation in that area of the skin.
Press the on/off button so that the
appliance is put on standby mode
(Continuous green light : Standby
mode, ready for the session).
The App will detect the device
when it is switched on. In case
of inactivity for more than 5 min,
the device switches off. Simply
press the on/off button again to
reenter standby mode. Press the
name of the device on your app
screen to enter main menu.
5
SELECT THE AREA
TO BE TREATED
To start a new session, select a program
(TENS, EMS or Massage) and using the
labels on the front and back of the body
image select the area you wish to treat.
6
ESTIMATE THE INTENSITY
OF PAIN (IN TENS MODE)
On a scale of 1 to 10, evaluate the intensity of
the pain. For no pain press 0, for extremely
intense pain press 10.
7
SELECT AND START A
SESSION.
Starting a session : Click on "+" button
to begin increasing intensity. When your
session is complete, estimate your
satisfaction level. The session will be
recorded in the History folder of the app.
To turn off, press the power button on
the app or device. Remove the
electrodes from the skin. Remove the
device from the electrodes. If the device
is idle for more than 5 minutes, it will turn off.
Make sure the device is turned off before removing the electrodes.
QUICK START GUIDE
ACRL-9100---Disconnected
ACRL-9100 ACRL-9100