Advertisement
6. MAINTENANCE
6.1.
b-Lo When this sign appears on the display panel, the battery power is low. replace both batteries with new by removing the cover
located at the rear of the pressure gauge. observe polarity.
6.2.
If the lcd is not working, change the batteries for new. If the fault is not cleared consult your sealey dealer.
6.3.
In use, continually listen for leaks from the tyre clip-on connector seal. replace the clip-on connector only, if faulty.
6.4.
After use, switch off, wipe clean with a dry cloth and store separately indoors.
6.5.
If it is necessary to remove the nipple fitting from the inflator, use a spanner on the nut, not by gripping the handle.
Function Keys:
1. on/unIt: Power on, units switch.
2. lIGHt: lcd back light.
3. oFF: Power off.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
Dispose of this product at the end of its working life in compliance with the Eu Directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. Contact your local solid waste authority for recycling information.
Batteries are housed at the rear of the gauge, refer to fig.2 and section 6.
under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak's
registered compliance scheme. Jack Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack sealey limited
ON
OFF
uNIT
LIGHT
clip-on
connector
Environmental Protection
WEEE Regulations
Sole uK Distributor, Sealey Group,
Kempson Way, suffolk Business Park,
Bury st. edmunds, suffolk,
IP32 7Ar
Original Language Version
Battery Housing cover
Battery Removal
01284 757500
01284 703534
fig. 2
www.sealey.co.uk
sales@sealey.co.uk
sA392
Issue: 1 - 04/07/14
Advertisement
