Boss RC-505 MKII Owner's Manual page 18

System Settings (MENU)
Item Parameter/Explanation
STORAGE
Settings for how USB should operate.
AUDIO MODE
Settings for the USB driver when USB audio is
used.
AUDIO ROUTING
USB
Settings for where the USB audio is routed.
INPUT LEVEL
Configures the USB audio input level.
OUTPUT LEVEL
Configures the USB audio output level.
RX CH CTL
Specifies the receive channel for messages
(control changes) that switch memories or control
the RC-505mkll.
RX CH RHYTHM
Specifies the receive channel for note messages
that play the drum sounds.
RX CH VOICE
Specifies the receive channel for note messages
used to create harmonies or vocoder effects.
TX CH
Specifies the transmit channel for MIDI messages.
SYNC CLOCK
Specifies the input to which the tempo clock is
synchronized.
MIDI
SYNC OUT
Sets whether to output MIDI clock or not.
SYNC START
Specifies what starts in synchronization when a
MIDI start message is received.
PC OUT
Sets whether to transmit program change
messages or not.
THRU MIDI IN
Specifies the connector used to output the MIDI
messages received through the MIDI IN connector.
THRU USB IN
Specifies the connector used to output the MIDI
messages that are received through the USB port.
CONTRAST
Adjusts the display contrast.
DISPLAY MODE
Sets which play screen is shown on startup.
INDICATOR
Settings for what the loop indicator should
SETUP
display.
FX KNOB MODE
Sets how the [INPUT FX] knob/[TRACK FX] knob
operate.
AUTO OFF
Turns the AUTO OFF function on/off.
18
Item Parameter/Explanation
MEMORY EXT MIN, MAX
Specifies the extent (lower limit and upper limit)
to which memories can be switched.
SETUP
KNOB FUNC 1–4
Specifies the functions that are assigned to the
[1]–[4] knobs.
FACTORY
Restores the unit to its factory settings (p. 24).
RESET