Page 1
ROUSSEAU 5000 ROUSSEAU ROUSSEAU 5000 5000 & 5000 5000 & 5000 & 5000 & 5000 & 5000- - - - L L L L & 5000 & 5000 & 5000 (Lighted) Dust Solution Dust Solution Dust Solution Dust Solution READ THIS, IT WILL ONLY TAKE A SECOND...
Page 2
1. Assemble the stanchions 2. Locate the stanchions so they do not interfere with the saw at maximum bevel and angle. 3. Drill if necessary and bolt the stanchions to the tool platform with the 2” carriage bolts. 4. Use the 3 arm knob, flat washer and 1”...
Page 3
Ideally the location of the stanchion assemblies will allow the front of the 5000 to be positioned parallel to the saw fence with the hood opening (left to right) to be approximately 36”.
Page 4
Parts Identification Ref. Name Qty. Stanchion 5/16-18 x 2” Carriage Bolt 5/16-18 KEP Nut 5/16-18 Wing Nut 5/16-18 x 3/4” Carriage Bolt 5/16-18 x 1” Carriage Bolt 5/16-18 Washer 5/16 3 Arm Knob Female knob 1/4-20 x 5/8” Hex Bolt * 10 1/4 -20 NyLock Nut * 11 Hoop Mount * * Installed...
Need help?
Do you have a question about the 5000 and is the answer not in the manual?
Questions and answers