2.
CLEANING OF FRONT PANEL
Remove the front panel and wash with clean
●
water.
Wash it with a soft sponge.
After using neutral detergent, wash thoroughly
with clean water.
When front panel is not removed, wipe it with
●
a soft dry cloth. Wipe the remote controller
thoroughly with a soft dry cloth.
Wipe the water thoroughly.
●
If water remains at indicators or signal
receiver of indoor unit, it causes trouble.
Method of removing the front panel.
Be sure to hold the front panel with both
hands to detach and attach it.
Removing the Front Panel
When the front panel is fully opened with both
●
hands, push the right arm to the inside to
release it, and while closing the front panel
slightly, pull it out forward.
CAUTION
!
Never use hot water (above 40°C), benzine, gasoline, acid, thinner
●
or a brush, because they will damage the plastic surface and the
coating.
Attaching the Front Panel
Move the projections of the left and right
●
arms into the Flanges in the unit and securely
insert them into the holes.
– 21 –