Related Manuals for Hongli A150
Summary of Contents for Hongli A150
- Page 1 Model: A150 Drain Cleaning Machine Operation Manual WARNING! Read this Operator’s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or serious personal injury.
- Page 2 • When operating a tool outside, use an General Safety Information outdoor extension cord marked “W-A” or “W”. WARNING! Read understand instructions. Failure to follow all instructions These cords are rated for outdoor use and listed below may result in electric shock, fire, reduce the risk of electrical shock.
- Page 3 • Do not force tool. Use the correct tool for your Read this operator’s manual carefully before application. The correct tool will do the job better using the A150 Drain Cleaner. Failure to and safer at the rate for which it is designed. understand and follow the contents of this •...
- Page 4 Use of this safety equipment may prevent Weight......22.5KG serious injury. Dimensions • Only use the A150 to clean drain lines up to 6″ Length ......455mm in diameter. Follow instructions on the use of the Height ......525mm machine. Other uses or modifying the drain Width ......
- Page 5 3. Inspect the Drain Cleaning Machine for any 1. Check work area for: • Adequate lighting broken, missing, misaligned or binding parts as • Grounded electrical outlet well as any other conditions which may affect the • Clear path to the electrical outlet that does not safe and normal operation of the machine.
- Page 6 Clutch is a safety feature 2. Pull ten inches of cable from cable adapter designed to stop rotation of cable or adapters and slide into back of A150. when released. 3. Lift plunger pin on cable adapter and depress...
- Page 7 line opening. tool and nature of the obstruction. 4. Hold cable loosely in mitted hand. Put WARNING FOR/OFF/REVERSE switch in FOR (forward) Do not allow tension to build up in the cable. This position. will happen if the cutting tool hits a snag and NOTE! The motor will start but cable will not stops turning, but the motor and cable continue rotate.
- Page 8 • Hand must be on the cable to control its 10. As excess cable is retrieved from line, twisting action when it hits an obstruction. hand-feed cable back into A150. • Must have access to FOR/OFF/REVERSE 11. Release clutch handle just prior to cable or switch.
- Page 9 12. Turn FOR/OFF/REV Switch to OFF position. 13. Pull remaining cable and tool from sewer. Cable Containers Cable container on 5/16″cable adapter (optional) Special Procedures should be periodically cleaned. Reverse Operation 1. Remove cable from the cable adapter. Cable Running machine reverse will...
Need help?
Do you have a question about the A150 and is the answer not in the manual?
Questions and answers