Download Print this page

Graco 244342 Instructions-Parts List page 2

Electronic fluid commander meter pulse converter

Advertisement

Warning Symbol
WARNING
This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
D This equipment is for professional use only.
INSTRUCTIONS
D Read all instruction manuals, tags, and labels before operating the equipment.
D Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco
distributor.
D Do not alter or modify this equipment.
D Check equipment daily. Repair or replace worn or damaged parts immediately.
D Do not exceed the maximum working pressure of the lowest rated system component. See the
instruction manuals of the individual system components for their maximum working pressures.
D Handle hoses carefully. Do not pull on hoses to move equipment.
D Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose
Graco hoses to temperatures above 66_C (150_F) or below --40_C (--40_F).
D Do not stop or deflect fluid leaks with your hand, body, glove, or rag.
D Follow appropriate Shutdown Procedures whenever you stop dispensing; or clean, check, or
service the equipment.
D Comply with all applicable local, state, and national fire, electrical, and safety regulations.
FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and re-
sult in a fire or explosion and serious injury.
D Connect the electronic dispensing control to a grounded outlet. Ground the other equipment as
instructed in their separate instruction manuals.
D All electrical products must be wired by a qualified electrician.
D The control and all electrical products described in this manual must be installed in a non-hazard-
ous location.
D If there is any static sparking or you feel an electric shock while using this equipment, stop dis-
pensing immediately. Do not use the equipment until you identify and correct the problem.
D Keep liquids away from the electrical components.
D Disconnect electrical power at the main switch before servicing the equipment.
D Keep the dispense area free of debris, including solvent, rags, and gasoline.
D Do not smoke in the dispense area.
D Keep away from sources of heat.
2
309276
Symbols
Caution Symbol
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.
WARNING
CAUTION

Advertisement

loading