Setup And Configuration; Active Trim Erc Controls - Mercury 71712 Operation Manual

61899

Setup and Configuration

Refer to your authorized Mercury dealer for setup and configuration instructions.

Active Trim ERC Controls

IMPORTANT: Authorized Mercury dealers have the ability to disable the Active Trim feature. In this case, the Active Trim
buttons and lights on the ERC will not function.
90-8M0180922 MAY 2021
eng
1. Idle speeds
Maintains the existing trim position.
61896
2. Acceleration (hole shot)
Tucks the engine or drive under to minimize bow rise and improve time‑to‑plane.
61897
3. Planing speeds
Progressively trims the engine or drive based on GPS speed to maintain the most efficient
running attitude.
61898
4. Override
When the boat operator uses manual trim, the Active Trim system is immediately overridden,
returning full control to the operator.
Section 1 - DTS Controls and Features
Page 11