Advertisement
Quick Links
Advertisement
Related Manuals for Taiwan Electrical & Electronic Manufacturers NEOS3000A-3G
Summary of Contents for Taiwan Electrical & Electronic Manufacturers NEOS3000A-3G
- Page 1 EUROCASTER PBX MOBILE TRUNK MANUAL NEOS3000A-3G NEOS3000A-3G COMBINED Ver. 1 Page: 1/12...
- Page 2 Disable this “enter pin code” . If you have enable this functions, please disable this function before insert sim card into our NEOS3000A-3G. Our NEOS3000A-3G can't do it if it is exist, please try to disable this function from your handset mobile phone . (Warning: Disconnect the power before insert SIM card) 2.
- Page 3 1. Do not expose the unit to rain or moisture and keep dry place. 2. Please disable "Enter pin" functions from your mobile phone before insert sim card into NEOS3000A-3G. 3. Cellular signal strength, choose a location where is above ground and near the windows if it is hard to receive signal .
-
Page 4: Setting Mode
(see"permissible dialing") and after finished you can set up this functions to enter "8012xxx" . You can only choose one of them (c) & (f) when connect to PSTN. All RESET back to FACTORY DEFAULT , PRESS 999 . (All functions will be back to factory default) NEOS3000A-3G COMBINED Ver. 1 Page: 4/12... - Page 5 Thank you for choosing the NEOS3000A-3G series product from Gainwise. This innovative product make you connect to standard telephone equipment with GSM engine into a cellular network for total communications flexibility. You can connect the NEOS3000A-3G to the land phone or the analog trunk of the PABX or key system.
- Page 6 (If you don’t have PSTN or need LCR, you don’t do it.) 3-2. Connect one end of phone cord to the PHONE port of NEOS3000A-3G and the other end to the analog port of the PABX. (or key system or the land phone) 3-3.
- Page 7 3-2. If the programming is fail, the green LED and yellow LED of NEOS will flash three times and you can hear three Du tones. If you hear setup tone, you can reprogram the function 3-3. You can hang up the handset to cancel this programming when you press wrong code. NEOS3000A-3G COMBINED Ver. 1 Page: 7/12...
- Page 8 NEOS reverse the polarity back. 5-3. Polarity reversal Option Press【963】to disable polarity reversal of outgoing. Press【964】to enable polarity reversal of outgoing. Press【967】to disable polarity reversal of incoming. Press【968】to enable polarity reversal of incoming NEOS3000A-3G COMBINED Ver. 1 Page: 8/12...
- Page 9 Enable polarity reversal of incoming. Receive Volume X is 0 to 4. Adjust the receive volume of engine. Reset Default Enable the default setting Password is 〞1234＃〞. Factory Default Outgoing time is not limited. setting Disable limiting dial NEOS3000A-3G COMBINED Ver. 1 Page: 9/12...
-
Page 10: Frequently Asked Questions (Faq)
2. Check the outgoing call is still can go through by PSTN line, if outgoing call can’t go through PSTN, This telephone machine or PBX system is damaged. 3. Change another Telephone machine and check again follow above procedure. NEOS3000A-3G COMBINED Ver. 1 Page: 10/12... - Page 11 GREEN BLINKING CONNECT TO INTERNET LED PROBLEMS CHECK POWER S TATUS OUND ESULTS 0. 6/0.6 1.5/1.5 OMISO O INSERT SECOND SECOND CARD FLASHING FLASHING 0.6/0.6 1.5/1.5 OMISO IM CARD SECOND SECOND FLASHING FLASHING REGISTERED NEOS3000A-3G COMBINED Ver. 1 Page: 11/12...
- Page 12 EuroCaster - www.eurocaster.eu NEOS3000A-3G COMBINED Ver. 1 Page: 12/12...