Table of Contents
Advertisement
SEQUENCE
Set the dwell time of each, single channel display in sequential display
DWELL TIME
mode (3~60seconds)
SITE
Select a channel to apply the name and covert settings change using the
mouse or the remote control.
Select a channel to apply the following settings using the mouse.
NAME
Set the channel name. Press the right square button and set the channel
name and select OK using the mouse.
The name can be made up to 36 characters.
COVERT
Enable/disable display of the specified video channel in live display.
COLOR TUNING
Brightness: Change the brightness value. (0~100)
Contrast: Change the contrast value(0~100)
Hue: Change the hue value(0~100)
Saturation: Change the saturation value(0~100)
Sharpness: Change the sharpness value(0~100)
VIDEO OUTPUT
Select video output resolution, Support 3840x2160, 2560x1440,
1600x1200, 1280x1024, 1920 X 1080, 1280 X 720
(HDMI)
Select Sub Monitor Video out.
SUB MONITOR
OUTPUT
CVBS or SPOT
44
Advertisement
Table of Contents
