M.2 Solid-State Drive - Lenovo IdeaCentre Mini 5i User Manual

8. Connect the signal cable and the power cable to the new storage drive.
9. Reinstall all removed parts. Then, reconnect the ac power adapter and all disconnected cables to the
computer.

M.2 solid-state drive

Prerequisite
Before you start, read Appendix A "Important safety information" on page 27 and print the following
instructions.
Attention: To replace the Optane memory in the M.2 solid-state drive slot, go to
docs/tg_ssd for details.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 12 .
2. Remove the memory and M.2 solid-state drive shield. Then, remove the screw from the M.2 solid-state
drive.
3. Slide the M.2 solid-state drive out.
4. Install the new M.2 solid-state drive in.
https://support.lenovo.com/
.
Chapter 4 CRU replacement
17