Changing The Program Or Adding Laundry; Program Interruption; Program End; Removing Laundry And Switching Off The Dryer - Siemens WT45M232GB Installation And Operating Instruction

Changing the program or
adding laundry
You can remove or add laundry and
change or alter the program at any time
during drying.
To pause the program, open the
1.
dryer door or press the Start button.
Add or remove laundry.
2.
Select another program or an
3.
additional function, if required.
Close the dryer door.
4.
Press the Start button.
5.
The program duration in the
Note:
display panel is updated depending on
the load and residual moisture in the
laundry. The values displayed may
change after the program is changed or
the load is adapted.

Program interruption

The program can be interrupted at any
time; to pause, open the dryer door or
press the Start button.
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the program, you must
remove the laundry items and spread
them out so that the heat can disperse.

Program end

"Ÿš appears in the display panel.
Operating the appliance
Removing laundry and
switching off the dryer
Remove the laundry.
1.
Turn the program selector to the "off"
2.
position.

Clean the fluff filter

During drying, fluff and hair from
Note:
the laundry is trapped by the fluff filter. If
the fluff filter is blocked or dirty, this
reduces the flow of air, which prevents
the dryer from achieving its maximum
performance. Clean fluff filters also
reduce energy consumption and the
drying time.
Clean the fluff filter after each drying
cycle:
Open the dryer door and remove all
1.
fluff from the door.
Pull out the two-part fluff filter.
2.
en
27