ΠDraining The Condensation; Water - Siemens WT45M232GB Installation And Operating Instruction

Œ
Draining the
condensation water
C ondensation will form in the appliance
D r a i n i n g t h e c o n d e n s a t i o n w a t e r
as it dries the laundry.
You must ensure that the drain hose is
connected when you operate the
appliance.
If there is no drain hose connected to
the appliance, the condensation water
from the appliance will run into the
condensation container. In this case,
you will need to empty the condensation
container each time the dryer finishes
drying the laundry, and also if it
becomes full before drying is complete.
Connect the drain hose as follows:
Remove the accessories from the
1.
dryer drum.
Draining the condensation water
When the dryer is delivered from the
2.
factory, the hose for discharging the
condensation into the condensation
container is fastened to the
connecting piece.
Disconnect the hose from the
3.
connecting piece and put it in the
"parked" position.
Take the drain hose from the
4.
accessories and secure it to the free
connecting piece.
en
15