Content Warning Safety Notifications Part Name Installation Instruction Methods of Door Lock and Remove The Usage Method of the Detergent Box Function Introduction of Operating Panel The Introduction of Function and Program The Introduction of Washing Programs Maintenance Varieties of Functions Notice before Washing Non-fault Conditions Troubleshooting Guide...
Safety Notifications (Please Must Follow) In order to prevent the harm or damage to the user or the person and property of others, please make sure to follow the safety issues. Warnings The risk of electric shock. The danger of fire and current leakage 1.Please use 220V-240V, above 10A with 1.Do not allow the washing machine ground wire dedicated socket.
Installation instruction Make sure the temperature of the places where the washer is installed or placed above 0℃ or put it outside. Place the washer correctly according to management standards and regulations. Keep the base of washer ventilated when it is placed on the ground with carpet.
Page 35
Requires for positions Horizontal adjustment: The slant angle should be less than 1 degree. Drain pipe Power outlet The distance between any side of washer and Wash tub power outlet should be within 1.5 meters. Don't use too many electrical appliances in one outlet.
Page 36
Washers should be connected with water inlet. Please use attached new plumbing rather than the old. In order to ensure the quality, water injection tests are carried out before the washer leaves factory, so there may be water inside the internal tub, door seals and door panel, which are normal.
Page 37
Such washing machine is designed for home appliances, please do not install it on ship,traveling truck or plane. Please turn off the stopcock if long time out of use. (e.g vacation) Please remove plug and cancel door lock function to avoid child locking himself/herself inside.
Methods of Door Lock and Remove DOOR LOCK After operating,the door will be locked automatically and “Door Lock” light/picture on the panel is lighting. Remove Door Lock When “Door Lock” light/picture is lighting, press Start/Pause , washing/dewatering drum stop operating. Please wait for about 2 minutes,door lock will be removed automatically.
Image shown here is indicative only. Actual product you receive may differ. 1. On/Off Button Turn power On/Off. When procedure finish, press power to cut off power. Pre Wash Button If the cloths are too dirty, you can choose this program before washing. Pre Delay Button When use “Pre Delay”...
3H 6H 9H : This icon indicates the washing machine can make pre delay 3 hours、6 hours、 9 hours 、12 (3+9)hours 、15(6+9)hours 、 18(3+6+9) hours . ℃ ℃ ℃ ℃ ℃ Cotton Eco40-60 ℃ ℃ Tub Clean Cotton Program Introduction This program is suitable for the clothes which are moderate or mild dirty, like cotton, beddings, underwear, towels and shirt, etc…...
Page 42
Mix Function This function can be used to wash mix clothes like cotton,synthetic and so on (please do not mix wash the clothes that easily rub off). 1.Prepare for washing Open the door, put the clothes then close the door Taking the detergent box and add detergent then close it.
Page 43
3.Rotate the program button and choose the “Tub Clean”.
Page 44
Quick 15’ Program Introduction To wash clothes that are changed frequently, not too dirty and thin clothes 1.Prepare for washing. Open the door, put the clothes then close the door. Taking the detergent box and add detergent then close it. Connect the water inlet pipe well and make sure the faucet is running.
Eco40-60 The eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle, and that this programme is used to assess the compliance with the EU ecodesign legislation;...
Maintenance Please maintenance washing machine to extend service life. Before maintenance, please unplug. Body of washing machine The Clearance of After washing, please clean it with soft Detergent Box cloth. If much contamination ,please Please clean the detergent use appropriate detergent or soap. box regularly.
Page 47
Maintenance When washing machine is frozen 1.Cover stopcock and the universal coupling with hot towel. 2.Ake off the inlet pipe, and put it into 50 degree water. 3.Pour into the drum about 2-3L of 50 degree water. 4.Connect inlet pipe, turn on the stopcock and start the washing machine, please check whether inlet and outlet is normal.
Specification 6.0kg 6.0kg 250W 400W 60*44*85cm The introduction of frequently-used programs The following data just for reference only Average remaining moisture content 0.05 Cotton 0.25 1:33 Cotton 1.76 2:29 1:13 0.55 0.04...
Page 55
0.50 4.00 Environmental Protection Correct Dispasal of this product This marking indicates that this product should not be disp- osed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Need help?
Do you have a question about the SVL600 and is the answer not in the manual?
Questions and answers