Advertisement
Quick Links
6. Maintenance
1. Cleaning the Tank
After use or when the tank is full of dust (which is accompanied by a
noticeable loss of suction), the tank must be emptied.
a) Unfasten the locking latch and remove the vacuum head.
b) Remove the filter and clean out the dust from the tank.
c) Replace the filter and vacuum head, and fasten the locking latch.
2. Cleaning the Filter
a) Remove the filter.
b) Gently wash in clean warm water.
c) Allow to dry completely before refitting.
7. Technical
Model
Power
KV30B
1400W
8. Help
Call Kiam Power Products on 0151 548 5500 for technical assistance
or visit our website www.kiamproducts.co.uk
T: 0044 151 548 5500
F: 0044 151 548 5599
Voltage
Frequency
220v - 240v
50Hz / 60Hz
© Equipmart Ltd
www.kiamproducts.co.uk
Kiam
Power Products
KV30B
WET & DRY VACUUM CLEANER
WITH BLOWER FUNCTION
Instructions Manual
Read instructions manual before use!
Equipmart Ltd
Kiam House
Birchill Road
Knowsley Ind. Park North
Merseyside
L33 7TD
United Kingdom
T: 0044 151 548 5500
F: 0044 151 548 5599
© Equipmart Ltd
www.kiamproducts.co.uk
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for KIAM KV30B
Summary of Contents for KIAM KV30B
- Page 1 Frequency KV30B 1400W 220v - 240v 50Hz / 60Hz 8. Help Equipmart Ltd Call Kiam Power Products on 0151 548 5500 for technical assistance Kiam House or visit our website www.kiamproducts.co.uk Birchill Road Knowsley Ind. Park North Merseyside L33 7TD...
- Page 2 Blower Outlet Top Cover 5. Protective Safety Functions Switch The KV30B is equipped with several protective safety functions. Locking Latch When the tank is full, the vacuum will lose suction and emit a noise Air Inlet to indicate the motor is under strain. Turn off and unplug the...
- Page 3 4. How To Operate Accessories Connection To connect the vacuum hose into the machine, Vacuum hose insert the hose connector into the air inlet, make Tubes sure it is securely fastened. To remove the vacuum hose from the machine, press the release button on the hose connector and pull the connector out.
- Page 4 3. For Safe Operation Do not overturn the machine in case water goes into and damages the motor. Check before operation that the local power supply is the same as the specification on the rating label (240v). Do not use the machine in a Do not block the air inlet mouth combustible and explosive area as this will cause the motor...
Need help?
Do you have a question about the KV30B and is the answer not in the manual?
Questions and answers