Inserting Your Memory Card; Glossy Photo Paper; Printing An Index - Epson Stylus Photo R300 Series Quick Reference

Inserting Your Memory Card

See below to install your memory card:
CompactFlash TM or
Microdrive TM (left)
SD (Secure Digital) Card
or MMC (MultiMediaCard)
(middle)
xD Picture Card TM
(right)
When you insert the card, you see a message
indicating that you have inserted a memory card.
The printer reads and counts the images on
your card.
NOTE: The printer recognizes the first 999 files
only. If your photos aren't recognized, see your
User's Guide for troubleshooting information.
Memory Stick ®
(middle)
SmartMedia TM card
(right)
Loading 4 x 6 " Premium

Glossy Photo Paper

In Basic mode, you can print 4 x 6" photos on
EPSON ® Premium Glossy Photo Paper.
1
Place the paper against the
right side of the feeder.
2
Slide the left
edge guide
against the
paper.

Printing an Index

If you don't have the preview monitor, you'll need to
print an index of your images to choose the photo
you want to print.
1
Press the mode button to choose Basic mode.
2
button to highlight Select
Press the or
Photo and press OK.
3
button to choose Index.
Press the
NOTE: If you have a large number of photos and
you only want to print a range of a few to choose
from, select Range and press OK. Then use the
or button to choose a photo to start the
range under From and press OK, then choose a
photo to stop at under To.
4
Press OK.
5
Make sure Copies is highlighted and press OK.
6
Choose 1 each and press OK.
7
Press the Print button.