Specific Safety Rules - Black & Decker BDCMTO Instruction Manual

Oscillating tool attachment

Hide thumbs Also See for BDCMTO:

Instruction manual (29 pages)

Table Of Contents

Table of Contents

Available languages

20 • ENGLISH

or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool

accidentally.

d. Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are dangerous

in the hands of untrained users.

e. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tools operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits,

etc. in accordance with these instructions,

taking into account the working conditions and

the work to be performed. Use of the power tool

for operations different from those intended could

result in a hazardous situation.

5. Battery tool use and care

a. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used

with another battery pack.

b. Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

c. When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws, or other small metal objects,

that can make a connection from one terminal to

another. Shorting the battery terminals together may

cause burns or a fire.

d. Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause

irritation or burns.

6. Service

a. Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

7. Electrical safety

Warning! If the power cord is damaged, it must

be replaced by the manufacturer, authorized

BLACK+DECKER Service Center or an equally

qualified person in order to avoid damage or

injury. If the power cord is replaced by an equally qualified

person, but not authorized by BLACK+DECKER, the

warranty will not be valid.

8. Labels on tool

The label on your tool may include the following symbols:

A ........

Read

Instructions

Hz .......

Manual

W ........

Use Eye

Protection

min .....

Use Ear

Protection

Use proper

respiratory

protection

.......

V ........

Volts

FEATURES (Fig. A)

1. Oscillating tool attachment

2. Accessory clamping lever

3. Accessory holder

4. Sanding platen

5. Sand sheets

6. Plunge cut blade

7. Adapter plate

8. Bolt and top plate

9. Hex wrench

Accessories

Other oscillating tool accessories are available for a wide

range of applications including scraping, drywall cutting,

grout removal, thin set removal, and more. Please visit

www.blackanddecker.com for more details.

Warning! Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result

in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

Warning! Read all safety warnings and all instructions

provided with your Power Unit (BDCDMT112, BDCDMT120,

or BDEDMT) before using this attachment. Failure to

follow the warnings and instructions may result in electric

shock, fire and/or serious injury.