Advertisement
OPERATING INSTRUCTIONS
1. First Time Power On: Auto Pairing
The first time you power on the earbuds, place only the left ear bud in your left ear so
you can hold the control dongle in your right hand to see the control buttons and the
LED indicator and still hear the confirming voice prompts in your left ear. Once the ear
buds have turned on and paired with your Bluetooth device, insert the right ear bud
in your right ear.
PRESS and HOLD the Multi-Function Button ( ) on the control dongle for about 3
seconds until you hear the "Power On" voice prompt.
The first time the eabuds are powered on they will enter auto-pairing mode, indicated
by flashing red and blue LEDs and a "Pairing" voice prompt.
a) Make sure Bluetooth is enabled on your device (check in Settings or Options).
b) "iHome iB76" will apear on your device's Bluetooth menu.
c) Select "iHome iB76 to complete pairing. You will hear the voice prompt say "Your
device is connected". NOTE: If your Bluetooth device asks for a Password or a PIN
to complete the pairing process, enter "0000" on the keypad of your device.
You are now ready to begin streaming music wirelessly from your Bluetooth device to
your iHome iB76 Bluetooth earbuds.
2. Standard Power On: Auto-Linking Mode
After the first time, whenever you power on the earbuds, the blue LED will flash
slowly indicating that your earbuds are in Auto-Linking Mode (trying to re-link to a
previously paired device) that is within the normal pairing range of about 33-feet. If
your earbuds do not find a previously paired device that is in range and turned 'on'
within 3 minutes, they will power OFF to extend the battery life.
3. Manually Pairing Your iHome Earbuds With Your Bluetooth Device
NOTE: Your ear buds must be 'Off'' to begin the manual pairing process.
With the ear buds in 'Off' mode, PRESS and HOLD the Multi-Function Button (
on the control dongle for about 8 seconds. After 3 seconds you will hear the "Power
On" voice prompt, followed after another 5 seconds by the "Pairing" voice prompt
and flashing red and blue LEDs. Release the Multi-Function Button ( ). Follow the
a-c pairing instructions in step 1 above to complete pairing.
4. Power Off
To turn earbuds 'Off' at any time, PRESS and HOLD the Multi-Function Button ( ) on
the control dongle for about 3 seconds. You will hear the voice prompt say "Power
Off". The red LED flashes three times and then the power shuts off.
5. Using Your iHome Bluetooth Ear Buds
The following chart explains the basic functions and operations of your Bluetooth earbuds.
2
)
Advertisement
