Table of Contents
Advertisement
6372 BT Aviator 10M UG [3]
20
Settings
Use a 3.5mm stereo jack cable
(not supplied).
If you are having any difficulties
with your radio, selecting Restore
Defaults may end the problem.
All manuals and user guides at all-guides.com
2/9/04
4:49 pm
BT Aviator 10M – Edition 03 –2.09.04 – 6372
2. Press
Backlight off
1. backlight off is highlighted. Press
screen backlight.
2. To switch the backlight on again, press
Audio in
When plugging another device – such as an mp3 or CD
player – into the AUX IN socket to play through your BT
Aviator 10M you must switch the audio in setting ON.
1. audio in is highlighted. Press
is ON. You can now play the connected device through
your radio.
2. To exit the audio in setting, press
Restore defaults
You can restore your BT Aviator 10M to its original
settings. Please note that this will cancel any pre-set
stations you have stored on the 1-5 buttons.
1. restore defaults is highlighted. Press
seconds.
Page 20
to start the animation.
to turn off the
.
. Screen displays Line In
or
.
and hold for 2
Advertisement
Table of Contents
