Page 1
Operating instructions celexon Expert Wireless HDMI Set WHD30M-4K Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully be- fore connecting or operating this product. Please retain these instructions for future reference...
Page 2
If you notice any external damage to the unit or any unexpected or unusual fun- ctioning, do not continue to use the product. Contact the dealer from whom you purchased the product or celexon directly (Web: www.celexon.co.uk, Mail: info@ celexon.co.uk) for further information.
Incorrect installation or use may also invalidate the warranty. • If you are unsure about the use of the product, please contact your specialist per- sonnel, your dealer or celexon directly (Web: www.celexon.co.uk, Mail: info@celexon. co.uk). • Technical changes and errors expected.
Page 4
IN THE BOX 1x WHD30M - 4K 1x WHD30M - 4K - 2x 5V/1A USB 2x USB to Micro-USB cable Transmitter Receiver power supply unit FUNCTIONS • Transmission of HDMI signals via radio • Distance within a room up to 30m •...
RECEIVER FRONT VIEW 1. “LINK”-LED: indicates the connection status • LED off: Adapter is switched off or in standby • LED flashes slowly: Adapter is starting to establish the connection connection and has not yet completed • The transmitter is in scan mode and is searching a matching receiver •...
TRANSMITTER BACK 1. HDMI In: Connect your HDMI source to the transmitter. 2. Power: Connect the transmitter to the power supply using the supplied USB cable and the USB power adapter. Alternatively, you can use any standard USB power supply or a USB port from your source device, as long as it can supply the transmitter with 1A current.
RECEIVER BACK: 1. HDMI Out: Connect the receiver to your TV, monitor or projector via HDMI. 2. Power: Connect the receiver to the power supply using the supplied USB cable and the USB power adapter. Alternatively, you can use any standard USB power supply or a USB port from your display device, as long as it can supply the receiver with 1A current.
TROUBLESHOOTING • If the „Link“ LED‘s flash quickly, the technical connection is correct. If you still do not receive a picture/sound, check the picture or sound parameters of your external player. The sound and picture format (resolution, frame rate and colour depth) must correspond to the specifications on p.7 & p.8. •...
Page 11
Address: Gutenbergstraße 2, 48282 Emsdetten, DE Product name: celexon Expert HDMI wireless set WHD30M - 4K Products that are marked with the UKCA mark meet all requirements of the relevant UK directives. The UK declaration of conformity. can be requested from the address given: info@celexon.com The symbol indicates the separate collection of electricals in EU coun- tries.