Download Print this page

Pyle PWMA230BT Operating Instructions page 3

Wireless portable bluetooth pa speaker system, built-in rechargeable battery, wireless microphone, 400 watt

Advertisement

SYSTEM FUNCTION FIGURE
27.Trailer Handle
28.Heating Pane
29.Handle
30.Audio Out
31.Voltage Selector Switch
32.AC Fuse/Battery Fuse
33.Power line(~115V /230V)
34.External DC Input Jack
35.2PIN Power Socket
27
28
29
30
31
32
33
34
35
36
IMPORTANT!
To protect rechargeable battery life,
37
this unit is shipped without installing
battery fuse. Before using this unit,
please install fuse(included in the
accessries pack). Charge the battery
fully before
first use. Aviod total
d i s c h a r g i n g o f t h e b a t t e r y .
38
39
36.Rechargeable Battery Cover
37.Warning
38.4.5AH/12V Rechargeable Battery
39.Truckle Of Trailer
40.Mic Head
41.RF Indicator Of Handheld Mic
42.Power Switch Of Handheld Mic
43.Battery Housing Of Handheld Mic
40
41
42
43
3
INSTRUCTIONS
1. Confirm the power
AC Power: Before operation, please confirm the voltage is
same as the specified one marked on the label. If not, the unit
will be damaged.
Built-in Rechargeable Battery: You needn't plug-in the AC
power when the voltage for rechargeable battery is enough
but use the battery directly.
When the Low Voltage Indicator comes yellow, it indicates
the battery voltage is not enough, please charge it in time.
When the Low Voltage Indicator comes out, it indicates the
voltage is standard now.
If the unit is not used for a long time, please charge the rec-
hargeable battery every 2 months, 8-10 hours for each time.
2. Operation Instructions:
Plug the power cable into the socket and connect it with this
amplifier system.
Switch on the amplifier, the Power Indicator comes red.
During charging, RECHARGE indicator comes red, when the
indicator flashing, that means battery is amost full while it is
ready all indicators will off.
During charging, you can play music at the same time, then
RECHARGE indicator will flashing with the current
comsuption indicating the speed of charge. Charge time is in
direct proportion to the volume of music. When the battery is
full, RECHARGE indicator will stop flashing and then off.
Put two AA 1.5V battery into handheld microphone (bodypack
transmitter), push the Power Switch to middle, the Power
Indicator will flash once, RF Indicator comes on green,
the speakers are quiet.
4

Advertisement

loading