Carbon Filter; Installing The Handle - Zephyr Presrv PRW24F01BG Use, Care And Installation Manual

Installation Instructions
ZEPHYRONLINE.COM

Carbon Filter

A built-in carbon filter protects your wines by acting
as a natural barrier against harmful odors. The carbon
filter should be replaced every 3-6 months depending on
the unit's exposure level to odor. If the unit is placed in a
kitchen, regular replacement every three months is ideal.
Remove the carbon filter by turning counterclockwise to
unlock from rear panel.
Carbon Filter Replacement Part #: Z0F-C004

Installing the Handle

If a pro handle is desired, the part number is PRHAN-F001.
1. Push aside the door gasket on the side you wish to install the handle. Under the gasket you will see
two designated holes for handle installation and pre-installed screws.
2. Install the handle tightly as shown with two screws, lock washers and flat washers pre-installed.
Zephyr Presrv Pro Handle
Part #: PRHAN-F001 Color: Stainless Steel
Gasket
Flat Washer
Locked Washer
Handle
Screw
Door Frame
17
PRW24F01BG Use, Care, and Installation Guide