Remote Control Button - Panasonic CS-PS9NKH Service Manual

13.2 Remote Control Button

13.2.1 SET Button
To check remote control transmission code and store the transmission code to EEPROM
Press "Set" button for more than 10 seconds by using pointer
o
Press "Timer Set" button unit a "beep" sound is heard as confirmation of transmission code change.
o
13.2.2 RESET (RC) Button
To clear and restore the remote control setting to factory default.
Press once to clear the memory
o
13.2.3 TIMER ▲
To change indoor unit indicators' intensity:
Press continuously for 5 seconds.
o
13.2.4 TIMER ▼
To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F)
Press continuously for 10 seconds.
o
59